LASERTEC Shape – Laser texturing of geometrically defined surfaces in injection molds for Die & Mold and 3D laser ablation for the production of technical miniature molds, press dies and embossing tools.
LASERTEC PrecisionTool – complete machining of cutting edges incl. clearance angle, chip breakers and defined cutting edge roundings in ultra-hard materials with up to 3 mm / min.
LASERTEC PowerDrill – 5-axis laser precision drilling of cooling air holes in turbine components for aircraft engines and industrial gas turbines.
Workpieces
Blow mold for PET-bottles
Steel
Die & Mold
150 × 120 × 58.5 mm
Pressing die
Tungsten Carbide
Die & Mold
3 × 5 × 0.2 mm
Boring tool
PCD
Precision Tools
ø 250 × 313 mm
Turbine vane
Inconel
Aerospace
190 × 100 × 80 mm
Facts
LASERTEC Shape – 5-axis laser texturing with fiber laser
Complex and sophisticated textures in 3D free-form surfaces, engravings and inscriptions.
Lasering of surface textures with technical properties:
Scratch-resistant surfaces
Supermatte surfaces
Hydrophobic surfaces
High speed Z-shifter for fast positioning of the machining point in the Z-direction.
Highest repeatability and reproducibility
LASERTEC Shape – 5-axis laser ablation with femtosecond laser
Ultra-short pulse laser enables machining of tungsten carbide, glass, ceramics with surface finishes down to Ra 0.1 µm
Contact-free and gentle machining without heat input into the material avoids cracks and material stresses
Tool life can be increased by a factor of up to 10 for carbide embossing dies
LASERTEC PrecisionTool – 5-axis laser machining of precision tools
Up to 210 % faster and up to 56 % lower costs per part than EDM machining
Laser finishing of PCD, PCBN, CVD, MCD with up to 3.0 mm/min.
Smallest cutting edge radii ≤ 1µm for best surface finish on the end product
Freely selectable defined cutting edge rounding of 3, 6, 9, 12, 15 µm
Perfect, chipping-free cutting edges, clearance angles and chip breakers
LASERTEC PowerDrill – Technology leader in laser drilling
5-axis laser precision drilling of turbine blades and other components for aerospace / stationary gas turbines
Drilling on the Fly with up to 500 holes / second
Shaped hole technology for machining conical exit funnels